skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200221 rev. a ? skyworks proprietary information ? products and product information are subject to change without notice. ? october 5, 2006 1 data sheet AV102-12, AV102-12lf: hip3? variable attenuator 1.7?2 ghz features +50 dbm ip3 typical low loss 1 db typical attenuation 30 db typical good vswr <1.5:1 typical small soic-8 package available lead (pb)-free and rohs-compliant msl-1 @ 260 c per jedec j-std-020 description the AV102-12 is a current controlled, variable attenuator from skyworks series of hip3? components. it is designed to meet the wide dynamic range required in spread spectrum, wireless base station applications. a monolithic quadrature hybrid is teamed with a silicon pin diode pair in a plastic surface mount package reducing size and assuring consistency from part to part. skyworks offers lead (pb)-free, rohs (restriction of hazardous substances)-compliant packaging. new control current control current rf out rf in connection diagram innovation to go tm now available for purcha s e online. buy now buy now
skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com october 5, 2006 ? skyworks proprietary information ? products and product information are subject to change without notice. ? 200221 rev. a data sheet ? AV102-12, AV102-12lf 2 p a r a meter min. typ. m a x. unit frequency 1.7 2 ghz insertion loss (0 ma control current) 1 1.5 db attenuation @ 3 ma control current (1850 mhz) 18.5 25 db vswr all ports 1.5 1.8 input 3rd order intercept 47 50 dbm group delay 0.6 1 ns electrical specifications at 25 c p a r a meter (1) condition frequency min. typ. m a x. unit switching characteristics (2) rise, fall 10/90% or 90/10% rf 5 s on, off 50% ctl to 90/10% rf 8 s video feedthru (peak) 2mv maximum input power for <1 db 15 dbm attenuation variation operating characteristics at 25 c (0, 5 v) 1. all measurements made in a 50 system, unless otherwise specified. 2. 0?4 ma square wave total control current.
data sheet ? AV102-12, AV102-12lf skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200221 rev. a ? skyworks proprietary information ? products and product information are subject to change without notice. ? october 5, 2006 3 vswr (:1) input/output vswr vs. current @ 1700 mhz 1.0 1.1 1.2 1.3 1.4 1.5 0 0.001 0.002 0.003 0.004 0.005 current (amps) input output vswr (:1) input/output vswr vs. current @ 1850 mhz 1.0 1.1 1.2 1.3 1.4 1.5 current (amps) 0.0000 0.0010 0.0020 0.0030 0.0040 0.0050 input output attenuation (db) 0.0000 0.0010 0.0020 0.0030 0.0040 0.0050 attenu a tion vs. current -50 -40 -30 -20 -10 0 current (amps) 1850 mhz 2000 mhz 1700 mhz attenuation (db) 1.70 1.80 1.90 2.00 attenu a tion vs. frequency -25 -20 -15 -10 -5 0 frequency (ghz) 0 ma 0.2 ma 0.7 ma 1.7 ma 2.4 ma 3.0 ma input/output vswr vs. current @ 2000 mhz 1.0 1.1 1.2 1.3 1.4 1.5 current (amps) vswr (:1) 0.0000 0.0010 0.0020 0.0030 0.0040 0.0050 input output diode current (ma) 400 600 800 1000 typic a l pin diode current vs. volt a ge 0.01 0.1 1 10 diode voltage (mv) typical performance data
skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com october 5, 2006 ? skyworks proprietary information ? products and product information are subject to change without notice. ? 200221 rev. a data sheet ? AV102-12, AV102-12lf 4 ch a r a cteristic v a lue rf input power .5 w cw, 4 w @ 12.5% duty cycle control current 50 ma each diode operating temperature -40 c to +85 c storage temperature -65 c to +150 c maximum reverse diode voltage -10 v electrostatic discharge 125 v absolute maximum ratings recommended board layout 0.1630 0.0200 dia. via 4 places 0.0190 typ. 0.0555 typ. soic-8 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 max. (0.41 mm) x 45? chamfer pin 1 0.197 (5.00 mm) 0.189 (4.80 mm) 0.068 (1.73 mm) max. 0.010 (0.25 mm) 0.004 (0.10 mm) 0.010 (0.25 mm) 0.007 (0.17 mm) 0.158 (4.00 mm) 0.150 (3.80 mm) 8? max. 0.020 (0.51 mm) max. 0.244 (6.20 mm) 0.228 (5.80 mm) 0.050 (1.27 mm) bsc pin 8 pin 1 indicator 123 4 control current gnd 220 pf rf in gnd 680 876 5 gnd 220 pf 100 nh 100 nh rf out control current gnd v control pin out material is 10 mil fr4. performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the absolute maximum specifications. exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. caution: although this device is designed to be as robust as possible, esd (electrostatic discharge) can damage this device. this device must be protected at all times from esd. static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times. re c ommen d e d s ol d er reflow profiles refer to the ?recommended solder reflow profile? application note. t ape an d reel information refer to the ?discrete devices and ic switch/attenuators tape and reel package orientation? application note.
data sheet ? AV102-12, AV102-12lf skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 200221 rev. a ? skyworks proprietary information ? products and product information are subject to change without notice. ? october 5, 2006 5 copyright ? 2002, 2003, 2004, 2005, skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (?skyworks?) products or services. these mate rials, including the information contained herein, are provided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no r esponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other diffic ulties arising from any future changes. no license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. sky works assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of skyworks products, information or material s, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are provided ?as is? without warranty of any kind, whether express, implied, statutory, or ot herwise, including fitness for a particular purpose or use, merchantability, performance, quality or non-infringement of any intellectual property right; all such warranties are hereby expressly disclaimed. skyworks does not warrant the accuracy or completeness of the information, text, graphics or other items contained wit hin these materials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequential dam ages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, whether or not the recipient of mate rials has been advised of the possibility of such damage. skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which th e failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyworks customers using or selling skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications using skyworks products, which may deviate from published specific ations as a result of design defects, errors, or operation of products outside of published parameters or design specifications. customers should include design and operating safeguards to m inimize these and other risks. skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of skyworks products outside of stated published specifications or parameters. skyworks, the skyworks symbol, ?breakthrough simplicity? and hip3 are trademarks or registered trademarks of skyworks solutions, in c., in the united states and other countries. third-party brands and names are for identification purposes only, and are the property of their respective owners. additional information, in cluding relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
|
